Nominal Concrete Mix Proportioning

Posted 2 CommentsPosted in Project Management, Quality management system

Proportioning of Nominal Mix Concrete


“Each material has its specific characteristics which we must understand if we want to use it. This is no less true of concrete



Strength of Concrete

Constituents of concrete

Types of concrete

Tests on concrete materials

Nominal Mix Concrete

Proportioning of Nominal Mix Concrete



The concrete mix design is tested for its strength in laboratory. The test specimens used for are cylinders in USA and cubes in India and UK for example and these are used in various countries as per decision taken in these countries.
The concrete mix design in this BLOG shall be discussed on its cube strength basis. (The cube size is kept as 150 mm x 150 mm x 150 mm).


Strength of Concrete

Concrete strength units
Previously, concrete was defined as M 200 or M300. M200 means the 200 kg/centimeter 2.

Now it is defined as M20 or M30. M30 means 20 Newton/mm2.

 N = 1/10 Kf (Kilogram force)

As such M 200 Kg/cm2 is same as M 20 N/mm2
Also, 1N/mm2 = I MPa (Mega Pascale)

The concrete strength unit is in MPa (Megapascal) and N/mm

For example, as 30 MPa (Megapascal) or 30 N/ mm2


Constituents of concrete

The concrete Is composed of following ingredients (in specific limits as per codes and guidelines).
 Sand-Natural or Crushed or mix of natural and crushed

Aggregates- Natural or Crushed or mix of natural and crushed

Cementing Materials (Different type of cementing materials are – various types of cements, epoxy resins etcetera required for achieving the desired strength).



The above ingredients are manufacture or collected to the required specifications for concrete production, to maintain the designed concrete strength and workability (Workability means the ease with which concrete can be moved and placed in forms without segregation )

The strength of concrete, produced from these ingredients further depends on production and placement of concrete, along with variations in the properties of constituents of concrete.


Types of Concretes

Regular concrete (ordinary concrete up to M 60

High-strength concrete- Above M 60

Stamp ed concrete-Concrete laid over the main concrete such as architectural concrete

 High-performance concrete (have following desirable features)

Ease of placement

Compaction without segregation

Early age strengt 

Long-term mechanical properties



Heat of hydration


Volume stability

Long life in severe environments

Ultra-high-performance concrete

Self-consolidating concretes

Vacuum Concrete



Pervious concrete

 Nailing Concrete


Tests on concrete materials

The various tests suggested for constituents of concrete are as follows: (These may be modified as per work specifications)


The test results have defined limits of acceptance, adopted on good practices (standards, codes, etcetera)
Variations in quantities of concrete as required are done.

 In order to design a mix of desired strength the concrete, the concrete constituents are specifically proportioned on the basis of good experience, practices are available in the form standard and codes.


The results obtained based on mix proportioning are put to further trials and finally the desired mix proportion is used to produce concrete. It is a good practice to carry on mix proportioning at intervals to accommodate any variations in the qualities of constituents of concrete.


Finally, workability durability and strength are the factors that govern mix proportioning.


Nominal Mix Concrete

IS 456 – Plain and Reinforced concrete code of practice, suggest to use Nominal Mix concrete up to M20 and Design Mix concrete above M20
Nominal mix concrete is not designed and it may use excess quantity of cement and must be use for small quantiles of works  as per direction and approval of Engineer in Charge.
However, if the quality of M20 grade concrete is in mass, it is advisable to use the design mix concrete.


Proportioning of Nominal Mix Concrete

(for small and scattered job and as per approval of engineer in Charge)

Nominal mix design may be adopted for other grades of concrete as well as discussed above…


General-Blog posts from TecConsults shall be based on the topics given in the ‘JOIN US’ page, but not limited to available list of topics on the Viewers are now free to join TecConsults and can contact and  for their suggestions for managing the main and sub topi


“We should attempt to bring nature, houses, and human beings together in a higher unity.” Ludwig